Contact us: support@acryllab.com
Skip to product information
All products
A series / Inert-gas purging
Acrylic glove box
A transparent working chamber for handling samples, reactions and assembly work under nitrogen or argon.
$283.35
01 / Use & operation
Uses & operating limits
Choose A when you need glove access inside an enclosed nitrogen/argon workspace and do not need to evacuate the chamber. Gas inlet and outlet valves allow internal air to be displaced by an external inert-gas supply.
For moisture- or oxygen-sensitive work, specify the target level and operating procedure. Gas purity, sealing, chamber contents and the way the box is used affect the atmosphere achieved.
- Construction
- High-transparency cast acrylic
- Operating mode
- Nitrogen / argon purging
- Vacuum capability
- None in the A-series chamber
- Gloves
- Replaceable, double-ring reinforced latex gloves
- Standard range
- A01–A08, eight nominal sizes
02 / Models & dimensions
Models & dimensions
Choose a model for your equipment and the clearance needed to operate it. Confirm clear internal dimensions and the access opening before ordering if equipment fit is critical.
For the standard angled-front layout, the front vertical height and top horizontal depth are half the overall height and depth respectively: A05 is 300 / 300 mm; A08 is 350 / 350 mm. Custom layouts are available after drawing review.
| Model | Nominal W × D × H | Standard arrangement |
|---|---|---|
| A01 | 30 × 40 × 50 cm | Inert-gas glove chamber |
| A02 | 50 × 40 × 40 cm | Inert-gas glove chamber |
| A03 | 60 × 50 × 50 cm | Inert-gas glove chamber |
| A04 | 70 × 50 × 50 cm | Inert-gas glove chamber |
| A05 | 80 × 60 × 60 cm | Inert-gas glove chamber |
| A06 | 90 × 60 × 60 cm | Inert-gas glove chamber |
| A07 | 100 × 60 × 60 cm | Inert-gas glove chamber |
| A08 | 120 × 70 × 70 cm | Inert-gas glove chamber |
Select a model link to view that variant and its current price. Nominal size is not a guaranteed clear internal dimension.
03 / Included & optional
Standard equipment & options
Standard supply
- Acrylic glove chamber in the selected model size
- Gas inlet and outlet valves and sealed access door
- Replaceable operating gloves
- Internal power strip
- One basic sealed cable feedthrough
Optional configuration
Options and performance requirements are reviewed for your selected chamber and quoted separately. Only equipment listed in the confirmed order is included.
Working space, doors & gloves
Specify the minimum clear internal space, equipment loading dimensions and door clearance. Nominal chamber dimensions do not account for every panel, fitting or access constraint. Send a drawing or sketch if fit is critical.
Alternative glove materials, sleeves, glove-port locations and spare gloves require confirmation of mounting and sealing compatibility.
Gas, vacuum & liquid connections
Nitrogen/argon inlet and outlet valves are standard. Confirm the gas supply and tubing arrangement for your installation.
Extra gas ports, sealed sensor interfaces and liquid-line feedthroughs can be configured for your process. Vacuum fittings do not make an A-series chamber vacuum-capable.
Internal power & cable access
Confirm plug type, supply voltage and the total electrical load. A power strip supplies equipment inside the chamber; instrument signal leads, sensor cables and liquid lines can require separate sealed interfaces.
Additional cable feedthroughs and application-specific interfaces are quoted to suit the selected equipment.
Temperature & humidity control
Temperature and humidity modules are supplied as part of a complete AcrylLAB chamber system, with the agreed integration installed and tested before shipment.
Send the temperature range, humidity or moisture target and units, chamber size, internal heat or moisture sources, gas supply and door-opening frequency. Achievable performance and any acceptance conditions are confirmed for the selected configuration.
Sensors, measurement & purification
Specify the parameter, range, unit and required accuracy. Relative humidity (% RH), trace moisture (ppm H₂O) and oxygen concentration are different requirements.
A basic monitor does not remove moisture or oxygen. Trace-level analyzers, drying equipment and active gas purification or recirculation must be separately specified and quoted.
Pressure duty & construction
The A series is intended for inert-gas purging, not evacuation. If your process requires vacuum transfers, review the B-series antechamber arrangement. If the working chamber itself must be evacuated, review D or a separately engineered custom design.
Wall thickness, weight and the final drawing are available on request for the selected configuration.
04 / Ordering & delivery
Ordering & delivery
Standard models can be selected and ordered above. Request a quotation for custom dimensions, additional interfaces or integrated controls.
- Confirm the model, usable space, glove access and electrical supply.
- Send your atmosphere targets and any required instruments or modules.
- Provide quantity, delivery address and postal code for the applicable freight estimate.
Production/processing and transport are separate periods. The current quotation or order confirmation states the applicable schedule and shipping arrangement. Images are illustrative and are not dimensioned drawings.